H! Everybody, very soon I was thinking to modify my current rear Class S rims from 8,5x18 ET43 + 16mm spacer to 10,5x18 ET43. Will they fit without touching the suspension?
http://i.imgur.com/Brr283G.jpg
Anhang 289783
Druckbare Version
H! Everybody, very soon I was thinking to modify my current rear Class S rims from 8,5x18 ET43 + 16mm spacer to 10,5x18 ET43. Will they fit without touching the suspension?
http://i.imgur.com/Brr283G.jpg
Anhang 289783
Schicko di lacki, toute a fogo. El lassangne fazi vide cor meum al dente?! 10.5x18 multo bene pelegrino al forno.
Ich habe fertig.
Die Forensprache ist Deutsch. Bitte daran halten, ihr zwei. :D
if u change from 8,5 to 10.5 u got +50,8mm so if u have +16mm on spacer at the 8.5 u got without spacer an + of 34,8mm with a 10,5 Rim
i dont think this will fit
I understand! So you don't think there are 34,8mm available? I could try with a 20mm spacer. I know a guy that has fitted a pair of Lamborghini 11x19 ET55 + 18mm adaptors. With 10,5 I would be 3mm futher away from the suspension from that.
i think with the higher ET of 55 it fits better. u can try it with 20mm spacer but u have to check if it fits at all in your Fender.
I don't know what's the maximum ET I can use without rubbing inside, that's the problem. I could try with something higher than 43 but I don't know what's the limit. For the fitment I will use roller fender.
maybe u can test some rims at a cardealer near u? would be the best thing i guess.
10,5x18 is pretty hard to find.